Bird Technologies 5000-XT-Manual - Manual (Page 25)

11
5. Eject and disconnect the 5000-XT from the PC.
6. Press the Menu key.
7. Select Setup on the Main Menu.
8. Select Update Firmware on the Setup Menu. The Update Firmware file list
will display.
9. Select the newly downloaded firmware file from the list.
10. Select ACCEPT when asked “Update System Firmware?”
Note: The file will be checked. If file is corrupt, it will notify as such.
11. The following screens will be displayed:
a. “Loading” screen
b. “Erasing Flash” screen with a progress bar
c. “Writing Flash” screen with a progress bar.
d. “Update Success” screen.
12. Select OK when prompted after this message: “The system will now
power down.”.