Bird Technologies 5000-XT-Manual - Manual (Page 41)

27
Reflected Avg Interface
* - 5010 only supports APM/DPM Elements – No Element Type Select on
Menu.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Key Button Action
Right Arrow Changes the Main Measurement to Match
Left Arrow Changes the Main Measurement to Forward Avg.
Up Arrow Switch True Avg (W, uW, mW, kW, dBm)
Down Arrow Switch True Avg (W, uW, mW, kW, dBm)
OK Button Initiates Shutdown. See “Shutting Down” on
page 13.
Menu Button Goes to Main Menu.
Log Button Goes to Logging submenu.
+/- Toggles between “Small” and “Large” Display.
. (2 Sec) Performs a screen shot. See “Performing a Screen
Shot” on page 13.
0 (2 Sec) No effect
8 (2 Sec) Turn On/Off Smoothing
Menu & Log (2 sec) Language Selection Screen
Small Display Large Display