Directional power sensor (legacy) attached, Forward avg interface – Bird Technologies 5000-XT-Manual User Manual
Page 40

26
Directional Power Sensor (Legacy) Attached
Forward Avg Interface
* - 5010 only supports APM/DPM Elements – No Element Type Select on
Menu.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Key Button
Action
Right Arrow
Changes the Main Measurement to Reflected Avg
Left Arrow
Changes the Main Measurement to Match
Up Arrow
Switch True Avg (W, uW, mW, kW, dBm)
Down Arrow
Switch True Avg (W, uW, mW, kW, dBm)
OK Button
Initiates Shutdown. See “Shutting Down” on
page 13
Menu Button
Goes to Main Menu
Log Button
Goes to Logging submenu
+/-
Toggles between “Small” and “Large” Display
. (2 Sec)
Performs a screen shot. See “Performing a Screen
Shot” on page 13
0 (2 Sec)
No effect
8 (2 Sec)
Turn On/Off Smoothing
Menu & Log (2 sec)
Language Selection Screen
Small Display
Large Display