Bird Technologies 5000-XT-Manual - Manual (Page 34)

20
Forward Peak Interface
* - ‘
This mode displays the peak envelope power.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Key Button Action
Right Arrow Changes the Main Measurement to Forward Burst
Left Arrow Changes the Main Measurement to Match
Up Arrow Switch Fwd Peak (W, uW, mW, kW, dBm)
Down Arrow Switch Fwd Avg Power (W, uW, mW, kW, dBm
OK Button Initiates Shutdown. See “Shutting Down” on
page 13
Menu Button Goes to Main Menu
Log Button Goes to Logging submenu
+/- Toggles between “Small” and “Large” Display
. (2 Sec) Performs a screen shot. See “Performing a Screen
Shot” on page 13
0 (2 Sec) Zero/Cal Unit/Sensor
8 (2 Sec) Turn On/Off Smoothing (*for Fwd Avg)
Menu & Log (2 sec) Language Selection Screen
Small Display Large Display