Bird Technologies 5000-XT-Manual - Manual (Page 35)

21
Forward Burst Interface
* - Burst mode displays the Average power in a burst. The burst’s duty
cycle is measured burst width/period.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Key Button Action
Right Arrow Changes the Main Measurement to Crest Factor
Left Arrow Changes the Main Measurement to Forward Peak
Up Arrow Switch Burst Power (W, uW, mW, kW, dBm)
Down Arrow Switch Fwd Avg Power (W, uW, mW, kW, dBm)
OK Button Initiates Shutdown. See “Shutting Down” on
page 13
Menu Button Goes to Main Menu
Log Button Goes to Logging submenu
+/- Toggles between “Small” and “Large” Display
. (2 Sec) Performs a screen shot. See “Performing a Screen
Shot” on page 13
0 (2 Sec) Zero/Cal Unit/Sensor
8 (2 Sec) Turn On/Off Smoothing* (for Fwd Avg)
Menu & Log (2 sec) Language Selection Screen
Small Display Large Display