Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 47)

47
Copying from a CamCorder
In order to copy your CamCorder
recordings onto a video tape in the
BeoVision Avant, you have to connect
your CamCorder to the easy-access
sockets placed on the back of the
BeoVision Avant below the local
operation panel and start playback on
your CamCorder.
Then start recording via Beo4. While
the tape is being copied, you can watch
a TV programme or switch off the TV.
Press V TAPE to return to the copying
process.
Note: The actual recording must be operated with
the Beo4 remote control, but at any time during
the recording, CamCorder playback (pause, stop,
play, etc.) can be operated as usual (see how in
your CamCorder User’s guide).
Connect and start your CamCorder…
then
Press to prepare BeoVision Avant
for recording
then
Press to start recording
Use V TAPE and STOP to pause the recording,
RECORD to resume recording and a source button
e.g. TV to stop the recording entirely…
RECORD
RECORD
PHONES R L VIDEO S–VHS
BeoVision Avant easy-access socket panel
Just below the operation panel on the back of
BeoVision Avant, you will find a small socket
panel conveniently placed for connection of
headphones and CamCorder. The sockets marked
L, R, VIDEO, and S-VHS are for connection of a
video camera.