Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 4)

4
Before you start operating BeoVision
Avant, it may be a good idea to famil-
iarise yourself with the Beo4 principles
of operation.
Your BeoVision Avant video system is
designed for remote operation using
the Beo4 remote control.
Beo4 integrates remote operation of
your BeoVision Avant and of the basic,
daily functions in recent Bang &
Olufsen audio systems.
• Daily operations are carried out via
the Beo4 remote control. The Beo4
display reads the name of the source
you are watching and/or listening to.
• Additional functions can be obtained
via the Beo4 display, see the
following page.
• The somewhat more advanced
functions in the BeoVision Avant are
guided by menus which you can call
up on the screen (see pages 6-7).
Note: A few basic functions can be operated
directly on the small operation panel on the back
of the BeoVision Avant display bar. Please refer to
BeoVision Avant close-up pages 68-69 for further
information.
Nice to know about Beo4 buttons...
In the step-by-step operating sequences
shown in this guide, the buttons on the Beo4
and cues in the Beo4 display will be illustrated
like this:
Rectangular buttons for source
control, numbers and dedicated
functions
Buttons within the star-shaped
button for stepping and winding
The circular GO button for
accepting and storing instructions
The coloured buttons within the
star-shaped button are used for
special functions, it will be
explained in this guide when and
how to use them
The double-button LIST means
‘press repeatedly’ to reveal more
functions in the Beo4 LIST of
functions
STAND The cues in the Beo4 display
indicate either the current source
you are addressing or an extra
function which you call up by
pressing the LIST button
TV
GO
LIST
Your Beo4 remote control commands are
registered by a small receiver in the
BeoVision Avant display bar, placed on top of
the BeoVision Avant in the upper right hand
corner.
P R I N C I P L E S O F O P E R A T I O N
Beo4 and BeoVision Avant