Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 41)

41
Source (Which source do you want to record?)
The below sources may be available:
TV... For recording of TV programmes.
SAT... For recording of satellite programmes.
Radio... For recording of radio programmes
(audio only) from a Bang & Olufsen
audio system.
AV... For recording of the signal from any extra
video equipment connected to the
BeoVision Avant AV socket.
Note: The various options appear if they are
actually present in your BeoVision Avant setup.
Pr (Program number)
You must fill in the program number you want to
record from.
Note: If you press the MENU button while either
Pr or Source are lit up, you get access to the
special Timer Index listing your Timer recordings.
See the following page for further information.
Start and Stop (Start and stop times)
Key in the times you want the recording to start
and stop, key in e.g. 21:00 for 9 pm and 22:00 for
10 pm.
Note: While Start is lit up, you can press the MENU
button and call up Teletext to assist you with your
programming – see how on page 30-31.
Date or Days (Recording date or days)
Fill in the date on which you want the recording
to take place.
The video tape recorder writes:
Jan...
for January
Feb... for February
Mar... for March
Apr... for April
May... for May
Jun... for June
Jul... for July
Aug... for August
Sep... for September
Oct... for October
Nov... for November
Dec... for December
To fill in days, press the MENU button and Date
changes to Days. You can then select specific
weekdays on which you want recording to take
place.
At first, all the weekdays will be displayed:
M...
for Monday
T... for Tuesday
W... for Wednesday
T... for Thursday
F... for Friday
S... for Saturday
S... for Sunday
Press tt to step through the days, and press ▼ to
remove any day you don’t want. When the
weekdays, on which you want the recording to
take place, are displayed, press GO to accept the
days.
OK...
When OK is lit up, press GO to store your Timer
recording instruction.
Instant timer recording…
If you call up the Timer record menu while you
are watching a TV programme, the video tape
recorder will offer to record the TV
programme you are watching – starting now
and continuing for one hour.
If you accept this programming by pressing
GO, the recording will start immediately and
go on for the next hour. (You can of course
key in another stop time before pressing GO.)