Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 16)

> Tuning in: ...to satellite stations
16
Format… Two format settings are available, you
can store a format for each Satellite program. The
default setting is 15:9, but if ”noise” appears in
the right and left side of the picture, choose the
14:9 format instead, enabling the curtains on the
TV screen to hide the ”noise”. You can still
change the picture format for each program even
though you have stored a setting, see page 56-57.
Sound (mono/stereo/language)... Several types of
sound may be available for a particular satellite
station, e.g. both stereo and mono sound, or
several different languages. Alternatively, you
may have to call up a sound tuning menu to tune
in the appropriate sound frequency.*
Press ▲ or ▼ to switch between the options
currently transmitted, and stop when the sound
you wish to store is heard and/or displayed.
Note: Even though a preferred type of sound/
language is stored, you can still switch between
the different types while you are watching or
listening to a Satellite programme. See page 35
Switching sound for more information about the
various types of sound available.
*Note: Call up the Sound tuning menu by pressing
MENU, when Sound is highlighted.
What’s on the Sound tuning menu…
Sound… Stereo and Mono sound are available.
Use
▲ or ▼ to reveal options.
(Freq)… (Frequency)
Only applies for when Mono sound is selected.
Tune in the mono sound frequency.
Removing a tuned Satellite station…
Press MENU to call up the main menu, press 4
to select Sat list and press GO to call up the Sat
program list, use the
▲ and ▼ buttons to move
the cursor to the station you want to remove.
Then press MENU. When Clr? appears, press GO
to clear the program. See page 25, Program
lists, for further information.
The Sound tuning menu - for manual tuning of
sound frequency for Satellite stations.
Sound Left Right Bandwidth
Stereo 7.02 7.20 130 KHZ
Deemphasis Expand Sound level Picture
75 On Normal On
Bandwidth… For Bandwidth, the following
options are available: 130 KHz, 280 KHz, and 450
KHz. Use
▲ or ▼ to reveal options. If Sound is set
to Stereo, the bandwidth is set to 130 KHz
automatically, and it will not be possible to select
the item at all.
Deemphasis… In order to achieve the best
possible sound, you may have to deemphasise the
sound signal, so that it corresponds to the degree,
to which, it was preemphasised, when it was
transmitted. Select the appropriate option; 50, 75
or J17.
Expand… To achieve the best possible sound,
you may have to expand the sound signal.
Typically applies, when the transmitted sound is a
stereo signal. The function compensates for the
deviations which the sound elements, bass and
treble, undergo during transmission. To activate
the function, set Expand to On, to deactivate the
function, set it to Off.
Sound level… Select a sound level for a station.
As some stations broadcast programmes with
different sound levels, you can shoose to e.g. turn
the preprogrammed sound level down. The
options Normal and Low are available.
Picture… Indicates whether your station is a
Satellite Radio or TV station.
On…
Indicates that the picture screen will be
switched on – for Satellite TV stations.
Off… Indicates that the picture screen will not
be switched on, only sound is available – for
Satellite Radio stations.