Making a timer recording – Bang & Olufsen BeoVision Avant (1995-2005) - User Guide User Manual

Page 40

T I M E R R E C O R D I N G

Making a Timer recording

Before you start…
Before you make a Timer recording, make sure
that the built-in clock in the BeoVision Avant is set
to the correct time. See how on page 17.

Call up the Timer record menu to make
a recording which starts and stops
automatically at any time you specify.

You can record TV and satellite
programmes, as well as radio
programmes – if a compatible Bang &
Olufsen audio system is connected to
your BeoVision Avant.

You can call up Teletext to assist you
when you are making your recording.
See page 30-31 for further instruction
of how to use Teletext. You can also
call up the Timer Index to check or
delete your Timer recordings.

On the next page, the various options
available for each item in the menu are
listed...

Note: Whenever one or more timer recordings are
waiting to be executed, you will see the display
TIMER light up on the BeoVision Avant display
bar.

Note: Pressing and holding down the V TAPE
button on the close-up operation panel on
BeoVision Avant cancels a timer recording in
progress and switches the video tape recorder off.

Source

Start

Stop

Date

14:30

- 15:30 23 Aug

Press MENU for Teletext programming

1 Timer record
2

Timer play

TV list

Setup

The main menu

The Timer record menu allows you to program a
recording. You can program a recording which is
to take place on a specific date or a recording
which is to take place on specific days at the same
time.

Call up the main menu
The main menu appears…

Press to select the first item, Timer
record
The Timer record menu appears,
you can start programming...

Press to reveal options for the
items in the menu

Alternatively,
Use the number buttons to fill in
program number, start and stop
times etc.

Press to move from item to item in
the menu

If you want to make a recording for
specific days, move to the item
Date…

Press to change the item Date to
Days

When you have filled in the
necessary information in the menu...

Press to accept the information

Press to store your Timer recording

Press to call up Teletext to assist your
programming

Press to call up the Timer index;

through

then

While Start is lit up in the Timer record menu…
then

While Pr or Source are lit up in the menu…
then