Adjusting the picture – Bang & Olufsen BeoVision Avant (1995-2005) - User Guide User Manual

Page 33

P I C T U R E A N D S O U N D

Adjusting the picture

The picture levels in the BeoVision
Avant are already set to neutral values
which suit most situations, however, if
you wish, you can adjust the picture to
your liking.

When you have made your picture
adjustments, you must store them in
order to make them a permanent
setting.

If you want your picture adjustments to
be temporary, simply remove the menu
by pressing EXIT. The picture levels will
now be reset to their original settings
when you switch off the BeoVision
Avant.

What’s on the Picture menu…

Brilliance... Picture brilliance can be adjusted in

steps of two within a range of 00 to 62; 32 is
the neutral setting.

Colour... Colour intensity can be adjusted in steps

of two within a range of 00 to 62; 32 is the
neutral setting.

Contrast... The contrast level in the picture can

be adjusted in steps of two within a range of 00
to 62; 44 is the neutral setting.

Note: For video sources using the NTSC signal a
fourth option – Tint (colour shade or nuance) will
be available for adjustment.

Call up the main menu

The main menu appears…

Press to call up the Setup menu
if Sat is available, Setup will be
item 5

The Setup menu appears…

Press to select item number 3,
Picture

The Picture menu appears...

Press to adjust the picture as
required

Press to move the cursor from item
to item in the menu

Press to store your adjustment as a
permanent setting of the picture

Alternatively,
press EXIT instead of GO if you do
not want to store your adjustment

Press to remove the on-screen menus

Timer record

Timer play

TV list

4 Setup

Setup

Tuning

Sound

3 Picture
4

Stand

Source

Clock

V.Tape

The Picture menu allows you to adjust Brilliance,
colour, and Contrast. In some instances, a forth
adjustment will be available Tint.

Brilliance

Colour

Contrast

Main menu

The Setup menu

Make the adjustments you find necessary…

EXIT

then