Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 13)

13
What’s on the V.Tape tuning menu…
Pr (TV station)... The TV program number appears
here.
Fine (fine tuning)...To fine tune a station when it
is used via the video tape recorder.
Source (specific source selection)... You can
instruct the video tape recorder to get its
information from a specific source whenever it
records a specific TV programme:
V.Tape tuner... Is the basic setting and it should be
selected in far the most cases. The TV
programme is recorded from the video tape
recorder’s tuner, you can therefore watch
another TV programme while you are
recording.
TV tuner... Should be selected if you want to
record a particular programme directly from
the TV. Here, you cannot watch another TV
programme while you are recording.
V.Tape decoder... Should be used if you want to
record via a decoder connected to the V-tape
decoder socket.
Sound Indicates the type of sound you choose to
store for a specific program number:
Stereo... Indicates that stereo sound will be
selected for a program number or that the best
possible sound or sound quality will be selected.
Mono… Indicates that mono sound will always be
selected.