Presetting your favourite stand positions – Bang & Olufsen BeoVision Avant (1995-2005) - User Guide User Manual

Page 18

S T A N D

Press to call up the main menu

The main menu appears…

Press to call up the Setup menu, if
Sat is available Setup will be item 5
The Setup menu appears…

Press to call up the Stand menu

The Stand menu appears...

Press until the position 1, 2, or 0 is
displayed and stop when the one
you wish to store a Stand position
for is displayed

Turn the BeoVision Avant to the
preferred viewing angle

Press to store the current stand
position (as position 1, 2, or 0)

Repeat the procedure, if you wish to
store all three stand positions…

Press to remove the on-screen
menus

BeoVision Avant’s motorised stand,
enables you to turn the entire system
using your Beo4 remote control.

When you switch the system off, it
automatically reverts to a neutral
standby position (0), unless you store a
particular standby position.

You can preset two viewing angles
(stand positions 1 and 2), and a suitable
standby position (0) for the system*.
The BeoVision Avant then automati-
cally turns towards the
position you instruct it to turn to.

When you now switch on BeoVision
Avant, it will now turn to your
favourite preset position (1). You can
now choose which preset position to
turn it to, 2, 0, or 1 again.

*Note: Instead of pressing

and

to chose

viewing angles, you may turn the BeoVision Avant
to the position you want manually.

Presetting your favourite stand positions

The Stand position menu enables you to preset
stand positions which suit your favourite viewing
angles.

Timer record

Timer play

TV list

4 Setup

Setup

Tuning

Sound

Picture

4 Stand
5

Source

Clock

V.Tape

The main menu

The Setup menu

Stand position

Turn TV to preferred position

then

EXIT

then