Rockwell Automation SA3100 Distributed Power System Drv Config,Program - Manual (Page 4)

II SA3100 Drive Configuration and Programming
Chapter 5 On-Line Operation
5.1
Loading the UDC Module’s Operating System ................................................5-1
5.2 Loading the Drive Parameters and UDC Tasks ...............................................5-1
5.3 Running, Stopping, and Deleting UDC Application Tasks ...............................5-2
5.4 UDC Information Log and Error Log ................................................................5-3
Appendix A SA3100 Vector Regulator Register Reference ........................................................ A-1
Appendix B SA3100 Volts / Hertz Regulator Register Reference ............................................... B-1
Appendix C SA3100 Local Tunable Variables ............................................................................. C-1
Appendix D Vector with Constant Power Regulator .................................................................... D-1
Appendix E Volts per Hertz (V/Hz) Regulator.............................................................................. E-1
Appendix F Status of Data in the AutoMax Rack After a STOP_ALL Command or
STOP_ALL Fault ...................................................................................................... F-1
Appendix G Torque Overload Ratio Parameter Precautions ....................................................... G-1
Appendix H Default Carrier Frequency and Carrier Frequency Limit for Drive
Horsepower Ranges ................................................................................................ H-1
Appendix I Vector with Constant Power Parameter Entry Example.............................................I-1
Appendix J Commissioning Procedure for Non-Constant Power Algorithim Operation............... J-1