Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 92)

Publication DNET-UM003A-EN-P - August 2000
3-40 Connect Devices and Commission Nodes
you no longer wish to have the software look for that device at
that address, select the device and delete it.
To fix the error, you would need to:
•
check device connections
•
re-browse your network
•
close the software, re-power your network, and go online
•
re-commission the devices
•
if the above does not solve your problems, start the Starter Kit
process over. If that does not work, contact your Rockwell
representative.
You can use the provided file, but we recommend that you
follow the step by step instructions provided so you can gain
practical experience using the media and software.
Edit the Properties (not required)
1. Right mouse click on the ArmorBlock MaXum icon on the
network and you see:
2. Click Properties to edit the properties of the ArmorBlock MaXum
you just placed on your network.