Files to use with your starter kit -2, Files to use with your starter kit – Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual User Manual
Page 124

Publication DNET-UM003A-EN-P - August 2000
5-2 RSNetWorx for DeviceNet Starter Kit Demonstration
If you use your own file that you created earlier for the
demonstration, you must follow the instructions accurately when
setting node numbers and mapping the inputs/outputs. The ladder
logic is written to recognize certain devcies at certain node addresses
with particular mapping attributes. If the address or mapping does not
match what is in the provided ladder, the demonstration won’t work
properly.
If you are proficient in modifying the mapping and ladder logic feel
free to experiment. If you find that you have modified your files and
the demonstration won’t work, reload and open the provided .dnt and
corresponding ladder file and start over.
Files to Use With Your Starter Kit
Some of the device descriptions and rung explanations may not
display when you open the ladder logic file. Refer to the ladder
logic illustrations on pages 5-4 through 5-7 for descriptions and
explanations.
Starter Kit:
RSNetWorx
filename:
Ladder Logic filename:
SKIT1
1747-SDN and the 1770-KFD
SKIT1.dnt
SKIT1.rss
RSLogix 500
Version 2.5 Revision 2.57.0.0
SKIT2
1747-SDN and the 1784-PCD
SKIT2.dnt
SKIT2.rss
RSLogix 500
Version 2.5 Revision 2.57.0.0
SKIT3
1771-SDN and the 1770-KFD
SKIT3.dnt
SKIT3.rsp
RSLogix 5
Release 3.0 Revision
3.22.00.00
SKIT4
1771-SDN and the 1784-PCD
SKIT4.dnt
SKIT4.rsp
RSLogix 5
Release 3.0 Revision
3.22.00.00
SKIT5
1756-DNB and the 1770-KFD
SKIT5.dnt
SKIT5.acd
RSLogix 5000
Revision 2.10.00
SKIT6
1756-DNB and the 1784-PCD
SKIT6.dnt
SKIT6.acd
RSLogix 5000
Revision 2.10.00
SKIT7
1784-PCIDS
SKIT7.dnt
SKIT7.rsp
RSLogix 5
Release 3.0 Revision
3.22.00.00