Rockwell Automation 1787-GEN2SKIT, -2, -3, -4, -5, -6, -7 DeviceNet Starter Kit User Manual - Manual (Page 46)

Publication DNET-UM003A-EN-P - August 2000
2-24 Construct Your Starter Kit
.
Access the computer’s expansion slots
To install the 1784-PCIDS card, you must access the computer’s
expansion slots. Refer to your computer’s user guide for instructions
on how to:
1. Turn off your computer.
2. Remove the computer’s cover.
3. Select a vacant PCI expansion slot.
4. Remove the slot’s expansion cover by loosening the screw on
the back (rear bracket) of the computer.
Insert the Card
To insert the card inside the computer:
1. Follow the card handling instructions included with your card.
2. Insert the 1784-PCIDS card into the edge connector and tighten
the expansion slot screw.
3. Turn on the computer to make sure it powers up correctly.
4. Replace the CPU cover (when computer comes up correctly).
TIP
The 1784-PCIDS card is 4.2” (10.7 cm) high and 4.721” (12
cm) long.
30138-M
´
´
FP
FP