Rockwell Automation T8094 8000 Series TMR System Safety Manual - Manual (Page 98)

SAFETY MANUAL
D oc N umber T8094
I ssue 27 – June 2013
Page 77 of 103
9.2 GLOSSARY
The definitions which follow are related to CS300 hardware and are used in only this
appendix of this manual.
ICCB Integrated computer control board (the legacy CS300 processor board)
PI Process Interface
PIM Process Interface Module
TM Termination Module
9.3 ASSOCIATED DOCUMENTS
9.3.1 Specifications
AN-T80014: Application Note, Trusted TM / CS300 Migration Process. Rockwell
Automation.
BASS 0257: CS300 Safety System Application Guidelines. Rockwell Automation.
PD-8162: CS300 Bridge Module
9.3.2 TUV Certification
The T8162 CS300 bridge module is certified as non-interfering to the Trusted TM
controller and can be used to migrate existing applications. It is not intended to be
used in new safety systems.
The autotest management function blocks are approved by TÜV for use in safety
applications.
You can download a copy of the TUV certificate from www.tuvasi.com.
9.4 LIST OF MODULES FOR SAFETY-RELATED APPLICATIONS
A legacy CS300 system is often made up by a large variety of components. The list
that follows shows the components of hardware which can be used with the Trusted
TM
migration in a safety-related application.
Table 18 - List of CS300 Modules Suitable for Safety-Related Applications
Item Description Part No. /
Revision Remarks
1 PI-316 extension chassis (6 series) 001-1053
… PI-651 bus interface card (qty 3) 099-1037
… process interface module (PIM) chassis 031-0531
2 PI-317 extension chassis (7 series) 001-1054
… PI-751 bus interface card (qty 3) 099-1037
… PIM chassis 031-0531
3 Ext. chassis interface board 001-1024-00
… assembled PCB 099-1037-03
4 PI-331/C triplicated power supply 24V DC 001-1011-00
… chassis assembly 031-1003-01
… modules 24V DC 031-1000-01
… cooling fan unit 031-1001-01