Rockwell Automation T8094 8000 Series TMR System Safety Manual - Manual (Page 7)

SAFETY MANUAL
D oc N umber T8094
I ssue 27 – June 2013
Page vii
PREFACE
This Manual contains the recommended Safety Requirements a System Integrator must
consider and implement when designing and building a Safety System using the 8000 series
range of products.
The contents of this Manual have been reviewed by TÜV and all recommendations and
comments made by TÜV have been incorporated.
REVISION AND UPDATING POLICY
All new and revised information pertinent to this document shall be issued by Rockwell
Automation and shall be incorporated into this document in accordance with the enclosed
instructions. The change is to be recorded on the Amendment Record of this document.
PRECAUTIONARY INFORMATION
WARNING
Warning notices call attention to the use of materials, processes, methods, procedures or limits
which must be followed precisely to avoid personal injury or death.
CAUTION
Caution notices call attention to methods and procedures which must be followed to avoid
damage to the equipment.
Notes:
Notes highlight procedures and contain information to assist the user in the understanding of the
information contained in this document