Step 17: re-assemble the product, Step 18: attach new label – Rockwell Automation 20D Balancing Resistor Kit - 690V Fr 13 PowerFlex 700AFE & Fr 13/14 PowerFlex 700H/S User Manual
Page 12
Balancing Resistor Kit for 600/690V Frame 13 PowerFlex 700AFE and 600/690V Frame 13 and 14 PowerFlex 700H/700S AC Drives
Publication PFLEX-IN028A-EN-P - February 2012
-
Copyright © 2012 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Rockwell Software, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: [email protected]
Online: www.ab.com/support/abdrives
Step 17: Re-Assemble the
Product
Re-assemble the product in reverse order.
Step 18: Attach New Label
On the label provided in the kit, fill in the information shown below. Then attach
the label by the inverter data nameplate.
IMPORTANT
Follow the Service Manual safety notices and instructions when powering up
the unit after repair.
Balancing Resistor Upgrade
Date: ________________