Rockwell Automation 20D Balancing Resistor Kit - 690V Fr 13 PowerFlex 700AFE & Fr 13/14 PowerFlex 700H/S - Manual (Page 11)

Rockwell Automation Publication PFLEX-IN028A-EN-P - February 2012 11
Balancing Resistor Kit for 600/690V Frame 13 PowerFlex 700AFE and 600/690V Frame 13 and 14 PowerFlex 700H/700S AC Drives
Step 15: Access Balancing
Resistor Assembly
See Figure 19 and remove the hardware to access the balancing resistor assembly.
Figure 19 - Accessing Balancing Resistor Assembly
Step 16: Install New Spare
Parts Kit
Components
See Figure 20 and install the new spare parts kit components as described below.
Figure 20 - Installing New Balancing Resistor Assembly Spare Parts Kit Components
1 1
2
2
3
3
1. Remove screws M4 x 8, 8 places; Tool: PZ2 – Head; Torque: 3.5 N•m
2. Remove screws M5 x 12, 8 places; Tool: TX25 – Head; Torque: 3.5 N•m
3. Unlpug balancing resistor connectors and remove the old balancing resistor kit.
4. Properly discard the old balancing resistor assembly.
1 1
2
2
3
3
1. Fasten screws M4 x 8, 8 places; Tool: PZ2 – Head; Torque: 3.5 N•m
2. Fasten screws M5 x 12, 8 places; Tool: TX25 – Head; Torque: 3.5 N•m
3. Connect balancing resistor connectors.