Rockwell Automation T8082 Trusted Toolset Suite - Manual (Page 37)

Trusted
TM
Toolset Suite T8082
Issue 14 Feb 10 PD-T8082 37
2.4. Configuring a SYSTEM .INI File
Once the user has configured all required templates for the Trusted TM System, the communications
port on the EWS has been configured and communications with the Processor are open, the user may
configure/edit the System.INI file as necessary. For the purpose of clarity, this Product Description will
describe the full configuration of the System.INI file with the basic module tray as shown in the opening
screen.
2.5. Trusted TM TMR Processor
Configuration of the Trusted TM TMR Processor is necessary at initial start-up of the Trusted TM System.
This is achieved by clicking the left-hand mouse button on the Processor module shown on the
opening screen. This will cause the dialogue box shown in Figure 20 below to appear.
Figure 20 TMR Processor Configuration Window
The values shown in the display above are the defaults for the Trusted TM TMR Processor. The user
must configure the Processor to suit the requirements of the Trusted TM System it is being used in. The
configuration of the parameters in each of the above areas is described separately in PD-8110B.