Rockwell Automation 2500 IntelliCENTER Software - Manual (Page 43)

IntelliCENTER Software 43
Publication MCC-UM001E-EN-P - March 2014
Follow these steps to run the IntelliCENTER Energy Data CD.
1. Close all programs.
2. Insert the IntelliCENTER Energy Data CD into your CD-ROM.
3. If Autorun is enabled on your computer, the installation starts automatically and you can skip steps 4 and 5.
4. From the Start menu, choose Run.
5. Type D:\Setup.exe (substitute the appropriate letter of your CD-ROM drive for D) and click OK.
The IntelliCENTER Energy Data CD determines if it is being run from an IntelliCENTER Energy server machine. If
the machine is an IntelliCENTER Energy server, then the Integration Assistant for IntelliCENTER Energy runs. For
information on how to use Integration Assistant refer to
Integration Assistant for IntelliCENTER Energy .
• After the Integration Assistant is completed, the EDS files is registered on the machine.
• IntelliCENTER Energy is now populated for the devices in your MCC.
• At this point, you are prompted whether you would like to install the IntelliCENTER Software Data CD as well
(databases and documentation). If you do, then refer to Installing IntelliCENTER Software Data Disks on page 11 .
TIP
If the machine is not an IntelliCENTER Energy server, refer to Installing IntelliCENTER Software Data Disks on page 11 .