Rockwell Automation 2500 IntelliCENTER Software User Manual
Page 17
IntelliCENTER Software 17
Publication MCC-UM001E-EN-P - March 2014
6. Click the Connection Type using the option boxes provided.
Intermediate: This type of connection checks all the units as they appear in the computer’s database against what is found
in the network. This is used to resolve differences between the hardware and software database. This is useful the first
time in connecting to a lineup or after changes have taken place (such as a replaced device).
Express: This type of connection assumes that no changes have taken place in the lineup since the last time the computer
was connected. This is the fastest connection.
Refer to Communication in the online help for further information on the connection type.
7. After the network paths and the connection type have been selected, click Finish.
The Elevation View appears automatically.
Notice the Elevation
, Monitor
, and Spreadsheet
icons are now active, and you are ready to use the
IntelliCENTER software.
TIP
If the IntelliCENTER MCC lineup has multiple networks included in it, there are multiple RSWho network paths listed. Each
network needs to be configured individually the first time they are monitored.