Rockwell Automation 2500 IntelliCENTER Software User Manual
Page 25
IntelliCENTER Software 25
Publication MCC-UM001E-EN-P - March 2014
Starting with version 5.00.01, there are two Monitor Views for two sets of devices:
• All drives and the SMC™ Flex controller use a newer Monitor View that reuses a common user interface that is used in
other Rockwell Automation products.
• All other devices use the legacy IntelliCENTER Monitor View. This Monitor View gives you access to the I/O mappings
of the device, trending capabilities, and access to parameters.
To access the Monitor View do one of the following:
• Double-click the unit to be viewed from the Elevation View.
• Select the unit and from the View menu, choose Monitor .
• Select the unit and click the Monitor View
icon.
Monitor View - PowerFlex Drives and SMC-Flex
When the Monitor View opens, you see the status Connected (highlighted in green) near the top right corner of the window.
This appears if you are online with the lineup.