Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual - Manual (Page 42)

3-6 GV3000/SE AC Drive Hardware Reference, Version 6.06
Table 3.4 – Recommended Power Wire Sizes for 15-25 HP Drives
Type of Wiring Terminals Size of Wire (Maximum)
AC Input Power R/L1, S/L2, T/L3
6 AWG, 13 mm 2
Output Power U/T1, V/T2, W/T3
DC Input Power +, -
Ground
Table 3.5 – Recommended Power Wire Sizes for 25-60 HP Drives
Type of Wiring Terminals Size of Wire (Maximum)
AC Input Power R/L1, S/L2, TL3
4 AWG (2X), 28 mm 2
Output Power U/T1, V/T2, W/T3
DC Input Power +, -
Ground
Table 3.6 – Recommended Power Wire Sizes for 60-100 HP Drives
Type of Wiring Terminals Size of Wire (Maximum)
AC Input Power 1L1, 1L2, 1L3
2L1, 2L2
4/0 AWG, 95 mm 2
Output Power U, V, W
AC Ground PE
2 AWG, 35 mm 2
DC Input Power 45, 47
4/0 AWG, 95 mm 2
DC Ground
6 AWG, 16 mm 2
Table 3.7 – Recommended Power Wire Sizes for 100-150 HP Drives
Type of Wiring Terminals Size of Wire (Maximum)
AC Input Power
1L1, 1L2, 1L3
2L1, 2L2
2/0 AWG (2X), 185 mm 2
Output Power U, V, W
AC Ground PE
4/0 AWG, 95 mm 2
Table 3.8 – Recommended Power Wire Sizes for 200-400 HP Drives
Type of Wiring Terminals Size of Wire (Maximum) *
* Wires must be lugged. Lugs must be Burndy YA31-2N or equivalent.
AC Input Power R/L1, S/L2, T/L3
350 MCM (2X), 177 mm
2
Output Power U/T1, V/T2, W/T3
DC Bus Connections DC-, DC+
Ground GND