Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual - Manual (Page 13)

Introduction 1-1
C
HAPTER
1
Introduction
This instruction manual describes the GV3000/SE drive hardware. It does not cover
the GV3000/SE drive software. For software information, refer to the GV3000/SE AC
General Purpose (V/Hz) and Vector Duty Drive Software Start-Up and Reference
Manual (D2-3359).
This manual is intended for qualified electrical personnel. It is organized according to
a logical progression of steps to be followed to install and troubleshoot the drive.
GV3000/SE drives will typically be referenced by horsepower in the manual. If
additional clarity is required, drive model numbers will also be included.
1.1 Related Publications
Refer to the following related publications as necessary for more information:
1.2 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance, call
1-800-726-8112.
• D2-3359 GV3000/SE AC General Purpose (V/Hz) and Vector Duty Drive
Software Start-Up and Reference Manual
• D2-3391 Snubber Resistor Braking Kit
• D2-3305 Motor Encoder Cable Kit
• D2-3308 AutoMax Network Communication Option Board
• D2-3348 Control and Configuration Software (CS3000)
• D2-3341 Super Remote Meter Interface (RMI) Board
• D2-3342 Operator Interface Module (OIM)
• D2-3390 ControlNet Network Communication Option Board