Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual User Manual
Gv3000/se ac drive
Table of contents
Document Outline
- GV3000/SE AC Drive Hardware Reference, Installation, and Troubleshooting Manual D2-3360-6
- Important User Information
- Document Update
- Summary of Changes
- Table of Contents
- 1 - Introduction
- 2 - About the Drive
- Identifying the Drive by Model Number
- NEMA Enclosures
- 1-25 HP GV3000/SE Drive Component Locations
- 25-60 HP GV3000/SE Drive Component Locations
- 60-100 HP GV3000/SE Drive Component Locations
- 100-150 HP GV3000/SE Drive Component Locations
- 200-400 HP GV3000/SE Drive Component Locations
- Regulator Board Description
- Optional Equipment
- 3 - Planning Before Installing
- 4 - Mounting the Drive, Grounding, and Finding Wire Routing Locations
- 5 - Installing Input Power Wiring
- Installing Transformers and Reactors (Optional)
- Installing Fuses for Branch Circuit Protection
- Installing a Required External/Separate Input Disconnect
- Installing Power Wiring from the AC Input Line to the Drive’s Power Terminals
- Installing Power Wiring from an External DC Bus to the Drive’s Internal DC Bus Terminals
- Changing Blower Transformer Taps
- 6 - Installing Output Power Wiring
- 7 - Wiring the Regulator Board Terminal Strip
- 8 - Completing the Installation
- 9 - Troubleshooting the Drive
- A - Technical Specifications
- B - Compliance with Machinery Safety Standard EN 60204-1:1992
- C - Compliance with Electromagnetic Compatibility Standards
- INDEX
- Back Cover / Publication D2-3360-6 June 2013