Rockwell Automation 6186M-xxxx Industrial Performance Monitors Installation Instructions - Manual (Page 18)

18 Industrial Performance Monitors
Rockwell Automation Publication 6186M-IN002C-EN-P - December 2011
DIN Rail Mounting of the AC Power Adapter
You can mount the AC power adapter on a DIN rail by using the DIN rail mounting accessory,
catalog number 6189V-MPSDIN.
Follow these steps to mount the AC power adapter to a DIN rail.
1. Attach the DIN rail bracket to the bottom of the AC power adapter ( ).
2. Secure the DIN rail bracket by using four of the provided M4 x 6 mm screws ( ).
3. Torque the screws to 0.882 N•m (7.811 lb•in).
4. Attach the DIN rail to the wall or installation surface ( ) by using two M4 x 6 mm
screws
( ); if using an existing DIN rail skip to the next step.
Torque the screws to 0.882 N•m (7.811 lb•in).
5. Mount the AC adapter on the DIN rail by inserting the upper lip of the DIN rail bracket
on the top edge of the DIN rail
( ), then pressing the AC adapter firmly against the
lower edge of the rail
( ).
6. Secure the installation by tightening the fastener on the DIN-rail bracket ( ).