Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 70)

68 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 5 Windows Explorer
The directories and files can be opened or copied either individually or as a
complete directory, the same as you would with any files contained on the hard
drive of your PC/Terminal. The operating system uses a default program to open
the files.
Drive Directory
The drive directory contains information about the drive configuration and the
reports which can be generated and retrieved from the drive. The directory
contains two sub directories as shown in
Figure 70 .
Figure 70 - Drive Directory
Config Subdirectory
The configuration subdirectory displays information about the drive modules
(
Figure 71 ).
Figure 71 - Drive Config Directory
In this example:
• FRN 9.002J is the firmware of the drive
• French.ffw is the French language database
• The parameters.csf file contains a copy of the drive parameters
• The dim.bin file is for future use and is not active.
EXAMPLE A .TXT file is, by default, opened by an ASCII viewer or editor. A .CSV file is
opened by Excel™, if your PC knows this file type has been associated with the
Excel program and the PC has Excel installed.
TIP New firmware and language modules can be added to the drive by a simple
“Copy and Paste” or “Drag & Drop” operation of an .FFW file to this directory. If
the drive has not been previously placed into download mode, the files will
appear as write protected; similarly, “Copy and Paste” or “Drag & Drop” will not
work.