Rockwell Automation 7000 PowerFlex HMI Offering with Enhanced Functionality - Manual (Page 60)

58 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013
Chapter 4 Drive Terminal Application
Diagnostics Plot
The plot screen ( Figure 56 ) shows relationships and trends amongst the captured
data.
Figure 56 - Diagnostics Plot
Trace parameters which were selected on the Diagnostics Setup screen are plotted
automatically when the screen is selected.
Add or Remove Parameters
1. Select the desired parameter.
2. Press the X column header to add or remove the parameter.
3. Press Update to redraw the new plot.
Show True Value of a Captured Point
All values in the plot are normalized. To see the true value of a captured point,
even if it is not plotted:
1. Select the desired parameter from the list.
2. Click on the graph at the point where the desired value is sought.
The location is marked by a white marker and the true value is shown at
the bottom of the plot.
Other parameter values can be read without moving the marker point by selecting
the desired parameter from the list. The red marker shows the trigger point.
TIP Colors assigned to the parameter name, correspond to the colors used in the
plot.