Rockwell Automation ControlFLASH Firmware Upgrade Kit User Manual - Manual (Page 44)

44 Rockwell Automation Publication 1756-UM105E-EN-E - October 2012
Appendix B Create a Custom Interface to Process Firmware Downloads
Using the fields created, specify the path to the ControlFLASH executable, as
well as the text script files you want to use.
This example uses separate script files to flash controllers, I/O modules,
communication modules, and drives, but it is not required that they be separated.
Assuming that the location of the executable and the script files do not change,
these configurations need to be set only once. After configuration completes,
click the Run Updates tab and select the actions that you want to perform, which
include four boxes for the four different script files. Click Execute to run the
selected actions.