Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 95)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 95
Configure and Use Simulated I/O Chapter 5
The Select Device dialog box appears.
5. Verify the slot number and click Next.
The General dialog box appears.
6. Enter the label name for the 1789-SIM module.
The text you enter for the module scrolls across the Marquee on the front
of the module in the chassis monitor. If you do not enter a label name, the
default label of ‘Simulator Module’ appears.
For RSLogix 5000 software, version 20.00.00 and the Logix Designer
application, version 21.00.00 or later, you can specify any slot number for
the 1789-SIM module, as long as the RSLinx software module is
positioned in a slot other than its default 0. See
page 29 .