Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 49)

Publication 1756-UM528A-EN-P - April 2004
Configuring the Sequence of Events Module 4-9
Configuring Modules in a
Remote Chassis ControlLogix ControlNet Interface modules (1756-CNB or
1756-CNBR) or the EtherNet/IP Bridge module (1756-ENBT) are
required to communicate with Sequence of Events modules in a
remote chassis.
You must configure the communications module in the local
chassis and the remote chassis before adding remote Sequence of
Events modules to your project.
1. Add a communications module to the local chassis.
2. Choose a communications module (1756-CNB, 1756-CNBR or
1756-ENBT) for the local chassis.
3. Configure the communications module in the local chassis.
For more information on the ControlLogix ControlNet
Interface modules, see the Using ControlNet Communication
Modules in Logix5000 Control Systems user manual,
publication CNET-UM001.
For more information on the ControlLogix EtherNet/IP Bridge
module, see the Using EtherNet/IP Communication Modules
in Logix5000 Control Systems user manual, publication
ENET-UM001.
A. Right-click on I/O Configuration.
B. Select New Module