Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 27)

1 Publication 1756-UM528A-EN-P - April 2004
Chapter
3
Installing the Sequence of Events Module
What This Chapter
Contains This chapter describes how to install the Sequence of Events
module.
Installing the Sequence of
Events Module You can install or remove the module while chassis power is
applied.
Table 3.1
For information on: See page:
Installing the Sequence of Events Module 3-1
Keying the Removable Terminal Block 3-3
Connecting Wiring 3-4
Assembling The Removable Terminal Block and the Housing 3-7
Choosing the Extended-Depth Housing 3-8
Installing the Removable Terminal Block 3-10
Removing the Removable Terminal Block 3-12
Removing the Module from the Chassis 3-13
ATTENTION
The module is designed to support Removal and
Insertion Under Power (RIUP). However, when
you remove or insert an RTB with field-side power
applied, unintended machine motion or loss of
process control can occur. Exercise extreme
caution when using this feature.