Rockwell Automation 1756-IH16ISOE ControlLogix Sequence of Events Module - Manual (Page 33)

Publication 1756-UM528A-EN-P - April 2004
Installing the Sequence of Events Module 3-7
Assembling The Removable
Terminal Block and
the Housing Removable housing covers the wired RTB to protect wiring
connections when the RTB is seated on the module.
1. Align the grooves at the bottom of each side of the housing
with the side edges of the RTB.
Figure 3.8
2. Slide the RTB into the housing until it snaps into place.
20858-M
Housing
RTB
Groove
Groove
Side edge of RTB
Side edge of RTB
1756-TBCH RTB shown for reference
Strain relief area
IMPORTANT
If additional wire routing space is required for your
application, use extended-depth housing
1756-TBE.