Rockwell Automation 1746-HSTP1 Stepper Controller Module/ User Manual - Manual (Page 8)

1 Publication 999-121 - December 1999
Preface
Using This Manual
Overview Read this chapter to familiarize yourself with the rest of the manual. It
provides information concerning the:
• contents of this manual
• intended audience
• conventions used
• hazards of injury or equipment damage
Contents of this Manual This manual provides specific information relevant to the Stepper
Controller Module, Catalog Number 1746–HSTP1. The following table
identifies the chapters, titles and contents.
Chapter Title Contents
Preface Using This Manual An overview of this manual
1 Module Overview Module Overview, its operation and
hardware features
2 Installation and
Wiring Interconnection diagrams for various
hardware interfaces for communication
with the Stepper Controller.
3 Start Up and
Troubleshooting Start up, normal states of LED indicators,
troubleshooting and error handling
information.
4 Module Operation Describes interface selection, the Module’s
use of inputs and outputs, and operating
modes
5 Configuration and
Programming/Status Provides the steps necessary to configure
the SLC™ Processor and Stepper Controller
6 Application Examples Illustrated sequencer, configuration and
command data files.
Appendix A Specifications Temperature, humidity, input output,
voltage, timing and cabling information.
Appendix B Input/Output Quick
Reference A quick reference for the Input/Output
config and command bits and words.