Df1 protocol menu, Df1 full-duplex setup menu, Df1 protocol menu -8 – Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module User Manual

Page 62: Df1 full-duplex setup menu -8

Publication 1747-UM005B-EN-P - March 2006

5-8 Module Configuration Using an ASCII Terminal

DF1 Protocol Menu

When you press [4] to select the DF1 Protocol Menu, you are first
prompted at the bottom of the Top Level Setup Menu to select [H] or
[F]

for half- or full-duplex.

DF1 Protocol Menu

DF1 Full-duplex Setup Menu

Select full-duplex by pressing [F] when prompted at the bottom of
the Top Level Setup Menu. The DF1 Full-duplex Setup Menu provides
12 selections.

DF1 Full-duplex Setup Menu

IMPORTANT

Choose [F] for full-duplex when using RSLinx
software.

Enter Selection. . . . .4

1. CONFIG PORT
2. DF1 PORT
3. DH 485 PORT
4. DF1 PROTOCOL
5. DISPLA Y PARAMETERS
X. SAVE AND EXIT

DF1 Duplex = Full, New Value (H/F) =

DF1 Full Duplex Setup Menu

1. Duplicate Packet Detection
2. Checksum
3. Constant Carrier Detect
4. Modem Init String
5. Modem Init String Delay
6. Message Timeout
7. Hardware Handshaking
8. Embedded Response Detect
9. ACK T imeout
A. ENQuiry Retries
B. NAK Received Retries

X. SAVE AND EXIT

Enter Selection. . . . .