C. re-insert the module into the chassis – Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module User Manual

Page 54

Publication 1747-UM005B-EN-P - March 2006

4-16 Installation and System Configuration

c. Re-insert the module into the chassis.

2. Connect the DF1 cable to the DF1 port.

3. Connect the DH-485 cable to the DH-485 port.

4. Insert the cable tie in the slots and secure the cable.

5. Cover all unused slots with the Card Slot Filler (catalog number

1746-N2).

6. Apply power to the SLC 500 chassis.

7. Verify that the LED indicators on the module indicate normal

operation per the LED indicator table on page 1-3.

IMPORTANT

Make sure you have JW4 positioned for the Run
mode that corresponds to the functionality you’ve
chosen for your module.

DF1 Port

DH-485 Port