Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 51)

Publication 1747-UM005B-EN-P - March 2006
Installation and System Configuration 4-13
Configure Your SLC Chassis The slot containing the interface module must be assigned within the
SLC program. Using RSLogix 500 software, you can either manually
insert the KE module into the chassis configuration in I/O
Configuration or select Read I/O Config to read the current I/O
configuration out of the processor and insert the module
automatically. Enter the module ID code 4209. The ID code for
interface modules with series A functionality is 4209, while the ID
code for the interface modules with series B functionality is 3509.
Entering the module ID code will automatically create the correct
input and output words.