Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module User Manual
Rockwell Automation Equipment
Table of contents
Document Outline
- 1747-UM005B-EN-P, DH-485/RS-232C Interface Module User Manual
- Summary of Changes
- Table of Contents
- Preface
- 1 - Overview
- 2 - Quick Start
- 3 - Communicate with the Interface Module
- 4 - Installation and System Configuration
- Installation and System Configuration
- European Union Directives Compliance
- Choose the Module’s Functionality
- Set the Module’s Mode
- Verify CONFIG Port Configuration
- Verify DF1 Port Configuration
- Install Your Module in an Open Slot
- Connect Cable to CONFIG or DF1 Ports
- Connect Cable to the DH-485 Port
- Configure Your SLC Chassis
- Configure the DF1 Driver within RSLinx Software
- Configure Your Module
- Complete the Installation of Your Module
- 5 - Module Configuration with a Terminal Overview
- 6 - Module Configuration Using the Backplane
- Module Configuration Using the Backplane
- Overview
- Configure the Interface Module from the SLC Processor
- Place the Module into Software Run Mode from SLC Processor
- Read the Module’s Configuration from the SLC Processor
- Examine the SLC Processor’s Status Word
- Build the DF1 Configuration Packet
- Build the DH-485 Configuration Packet
- Build the Modem Init String Configuration Packets
- Use the Real Time Clock
- Establish a Data Echo Between the Interface Module and the SLC Processor
- Reset the Interface Module from the SLC Processor
- 7 - Interpret the LED Indicators
- 8 - Application Examples
- A - Specifications
- B - PLC-5 to SLC 500 Communications
- C - Lithium Battery Replacement, Handling, and Disposal
- D - Interface Module Configuration Worksheets
- Index
- Back Cover