Rockwell Automation 1771-SPI,D17716.5.122 SPI PROTOCOL INTERFACE - Manual (Page 39)

Creating Command and Status Blocks
Chapter 4
4-3
Blank MCC Worksheet for Your Application
Write your own entries in this blank worksheet to suit your application.
MCC Worksheet
Word Write your entries in this column.
1 baud rate = _______ SPI reports: Commands not Executed Y N . . . not Supported Y N
address format [1] = ____________ numeric format [1] = ___________
2 # of MCC pages above 1 = _____
3Ć4 zero
5 & 6 1st device ID = Addr =
7 & 8 2nd device
9 & 10 3rd device
11 & 12 4th device
13 & 14 5th device
15 & 16 6th device
17 & 18 7th device
19 & 20 8th device
21 & 22 9th device
23 & 24 10th device
25 & 26 11th device
27 & 28 12th device
29 & 30 13th device
last pair
or
63, 64
SYS returned?
[1] Your format selection here determines the format for all command and status bocks for the network.
Important: If the number of devices on the SPI link exceeds 60 (requires
another MCC page), continue on another sheet of paper and enter the number
of MCC pages above one page in word 2, above. For example, if you need
two MCC pages, enter 1 in word 2 above.