Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 75)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 75
Configure the Module Chapter 5
Communication Format
The communication format determines the following:
• Available configuration options
• Type of data transferred between the module and its owner-controller
• Tags that are generated when the configuration is complete
• Connection between the controller writing configuration and the module
itself
Table 12 lists the possible communication format choices. In addition to the
description below, each format returns status data and rolling timestamp data.
Electronic Keying
When you write configuration for a module you can choose how specific the
keying must be when a module is inserted into a slot in the chassis. The following
electronic keying options are available:
• Compatible Module
• Disable Keying
• Exact Match
For more information on electronic keying, see page 25 .
Use the Default
Configuration If you use the default configuration and click Finish, you are done.
Table 12 - Communication Formats on the High-speed Analog I/O Module
Format Definition
Archiving Connection Module stores 20 input data samples for each channel in the module’s on-board
buffers before it sends the I/O data to the controller.
Float Data Module returns floating point data.
CST Timestamped Float Data Module returns floating point data with the value of the system clock (from its local
chassis) when the data is sampled.
Listen-only CST Timestamped
Float Data Module returns floating point data with the value of the system clock from its local
chassis when the data is sampled to a controller that does not own the module.
Listen-only Float Data Module returns floating point data to a controller that does not own the module.
IMPORTANT Once the module is created, the communication format cannot be changed.
The module must be deleted and recreated.