Rockwell Automation 1756-IF4FXOF2F ControlLogix High-speed Analog I/O Module - Manual (Page 33)

Rockwell Automation Publication 1756-UM005B-EN-P - January 2013 33
Module Features Chapter 3
Status Information
Each ControlLogix high-speed analog I/O module has status indicators that
allow you to check module health and operational status.
The following status can be checked with the indicators:
• Calibration status —The display blinks to indicate when your module is
in the Calibration mode.
• Module status —The display indicates the module’s communication
status.
To see the status indicators on the ControlLogix high-speed analog I/O module,
see
Chapter 7 .
Full Class I Division 2 Compliance
All ControlLogix high-speed analog I/O modules maintain CSA Class I
Division 2 system certification. This allows the ControlLogix system to be placed
in an environment other than only a 100% hazard free.
CE/CSA/UL/C-Tick Agency Certification
The ControlLogix high-speed analog I/O module has obtained multiple agency
certifications, such as CE, CSA, UL, and C-Tick. If the module has received an
agency certification, it is marked as such.
Field Calibration
ControlLogix high-speed analog I/O modules allow you to calibrate each
channel individually or in groups, such as all inputs at once. The Logix Designer
application provides an interface to perform calibration.
To see how to calibrate your module, see Chapter 6 .
IMPORTANT Do not pull modules under power or remove a powered RTB when a hazardous
environment is present.