Required tools, Required system components – Rockwell Automation 1783-US08T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions User Manual
Page 9
Stratix 2000 Ethernet Unmanaged Switches 9
Rockwell Automation Publication 1783-IN001D-EN-P - January 2011
Required Tools
You need these tools to install the switch.
Required System Components
The switches require either of these types of power supplies:
•
24V DC rated voltage (10…35V DC; maximum 4 W power
consumption)
•
20V AC rated voltage (10…24V AC; maximum 6VA power
consumption)
See the procedure on page
to wire the switch.
Item
Description
Screwdriver
6 mm (0.25 in.) width blade
3 mm (0.12 in.) width blade, for use with electrical
connector
ATTENTION: To comply with the CE Low-voltge Directive (LVD),
this equipment must be powered from a source compliant with
Safety Extra Low-voltge (SELV) or Protected Extra Low Voltage
(PELV).
To comply with UL restrictions, this equipment must be powered
from a source compliant with Class 2.