Rockwell Automation 1783-US08T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions User Manual
Page 14
14 Stratix 2000 Ethernet Unmanaged Switches
Rockwell Automation Publication 1783-IN001D-EN-P - January 2011
5.
If the connector is not already installed in the switch, wire the connector
before replacing it in the switch.
6.
Use the 3 mm (0.12 in.) screwdriver to loosen the screw terminals on the
connector.
7.
Connect one AC output (20V AC nominal) from the low-voltge AC
power supply to terminal 5 (~20) and tighten the screw.
8.
Connect the other AC output (20V AC nominal) from the low-voltge
AC power supply to terminal 6 (~20) and tighten the screw.
Item
Description
1
Screw terminal connection from low-voltge AC power
supply to switch
-
1