Rockwell Automation 1783-US08T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions - Manual (Page 24)

24 Stratix 2000 Ethernet Unmanaged Switches
Rockwell Automation Publication 1783-IN001D-EN-P - January 2011
Specifications
Technical Specifications - Stratix 2000 Switches
Attribute 1783-US03T01F, 1783-US06T01F, 1783-US05T,
1783-US08T
Enclosure type rating Meets IP20
Inrush current, max 2.2 A
AC power-supply voltage rating 20V AC (10…24V AC)
DC power-supply voltage rating 24V DC (10…35V DC)
Isolation voltage 30V (continuous), Basic Insulation Type, between
communication ports and power ports
No isolation between individual communication ports
Type tested at 500V AC for 60 s
Power consumption, max 4 W (6VA)
Current 400 mA at 10V DC max
Wire size Communication connectors:
RJ45 connector according to IEC 60603-7, 2 or 4 pair
Category 5e min cable according to TIA 568-B.1 or
Category 5 cable according to ISO/IEC 24702
Power connectors:
1.5…2.5 mm
2
(16...14 AWG) solid or stranded copper
wire rated at 75 °C (167 °F) or greater 1.2 mm (3/64 in.)
insulation max
Torque, max recommended 0.8 N•m (7 lb•in) on power connectors
Fiber-optic Ethernet data rate 100 Mbps
Fiber-optic connecting mode Full duplex
Fiber-optic wavelength 1310 nm
Fiber-optic cable length, max Graded index multimode fiber; 2000 m (6562 ft)
Fiber-optic link budget 8 dB with 62.5 / 125 µm multimode cable
4 dB with 50 / 125 µm multimode cable
Fiber-optic connector type LC