Rockwell Automation 1783-US08T Stratix 2000 Ethernet Unmanaged Switch Installation Instructions - Manual (Page 8)

8 Stratix 2000 Ethernet Unmanaged Switches
Rockwell Automation Publication 1783-IN001D-EN-P - January 2011
In addition to a power status indicator, each port has these indicators.
• Each copper port has two link/status/activity indicators (only one of
which is active at a time).
• The fiber optic port has one link/status/activity indicator.
The switches operate on low-voltage AC or DC power.
Features supported by the Ethernet unmanaged switches include the following:
• 10 Mbps or 100 Mbps, full- or half-duplex communication, per copper
port autonegotiation
• Automatic crossover detection (auto MDIX)
• LC-type fiber optic connector; multimode cable
Use Caution When Handling Switches with Fiber Optic Ports
Observe the following when using the unmanaged switches equipped with fiber
optic ports (catalog numbers 1783-US03T01F and 1783-US06T01F).
When this indicator is lit Link speed is
Amber (copper port only) 10 Mbps
Green 100 Mbps
ATTENTION: Do not look into the optical port. Under certain
conditions, viewing the optical port may expose the eye to
hazards. When viewed under some conditions, the optical port
may expose the eye beyond the maximum permissible exposure
recommendations.