Rockwell Automation 1771-TCM TEMPERATURE CONTROL - Manual (Page 20)

2–7 Installing the Software
Publication 1771Ć6.4.5 - January 1997
15.In this dialog box:
If you select: Then:
Modify AUTOEXEC.BAT after creating a backup
copy.
(Note: This is the recommended choice.)
• the system asks if you want to modify your AUTOEXEC.BAT file so that it
automatically loads INTERCHANGE software. If you select No at that
prompt, you must manually start INTERCHANGE software *
• the system makes a backup copy of your AUTOEXEC.BAT file and
modifies the original
Make a backup copy of AUTOEXEC.BAT and
make changes to the copy.
• the system asks if you want to modify your AUTOEXEC.BAT file so that it
automatically loads INTERCHANGE software. If you select No at that
prompt, you must manually start INTERCHANGE software *
• the system will modify a copy of your AUTOEXEC.BAT file. You must
then examine the copy and make the appropriate changes to your actual
AUTOEXEC.BAT file. The software will not operate properly until you
edit your actual AUTOEXEC.BAT file
Do not make any changes to AUTOEXEC.BAT. no changes will be made to your AUTOEXEC.BAT file. * The software will
not operate properly until you edit the AUTOEXEC.BAT file. Detailed
instructions on editing this file are in the INTERCHANGE software user
manual (publication 5000Ć6.6.6).
* If you select in either of these three cases to not make any changes to the AUTOEXEC.BAT file, you must first start
INTERCHANGE software before you start Windows.
You are prompted to decide whEther you want the
AUTOEXEC.BAT file modified so that it will automatically load
when you start your computer. You are also reminded to reboot
your system to make the changes take effect.
The system then prompts you with this dialog box:
Note: If INTERCHANGE is already installed and configured,
you will not see this dialog box.