Rockwell Automation 1762-IR4 RTD/Resistance Input Module - Manual (Page 80)

Publication 1762-UM003A-EN-P - February 2003
A-4 Specifications
Cable Specifications
RTD Standards
Description Belden #9501 Belden #9533 Belden #83503
When used? For 2-wire RTDs and
potentiometers. For 3-wire RTDs and potentiometers.
Short runs less than 100 feet and normal
humidity levels. For 3-wire RTDs and potentiometers.
Long runs greater than 100 feet or high
humidity levels.
Conductors 2, #24 AWG tinned copper (7 x
32) 3, #24 AWG tinned copper (7 x 32) 3, #24 AWG tinned copper (7 x 32)
Shield Beldfoil aluminum polyester
shield with copper drain wire. Beldfoil aluminum polyester shield with
copper drain wire Beldfoil aluminum polyester shield with
tinned braid shield.
Insulation PVC S-R PVC Teflon
Jacket Chrome PVC Chrome PVC Red Teflon
Agency
Approvals NEC Type CM NEC Type CM NEC Art-800, Type CMP
Temperature
Rating 80°C 80°C 200°C
RTD Type α (3) IEC-751 1983,
Amend. 2 1995 DIN 43760
1987
SAMA
(4)
Standard
RC21-4-1966
Japanese
Industrial
Standard JIS
C1604-1989 Japanese
Industrial
Standard JIS
C1604-1997
Minco
(5)
100
Ω
Pt 0.00385 ● ● ●
200
Ω
Pt 0.00385 ● ● ●
500
Ω
Pt 0.00385 ● ● ●
1000
Ω
Pt 0.00385 ● ● ●
100
Ω
Pt 0.03916 ●
200
Ω
Pt 0.03916 ●
500
Ω
Pt 0.03916 ●
1000
Ω
Pt 0.03916 ●
10
Ω
Cu
(1) 0.00426 ●
120
Ω
Ni
(2) 0.00618 ●
120
Ω
Ni 0.00672 ●
604
Ω
NiFe 0.00518 ●
(1) Actual value at 0°C (32°F) is 9.042
Ω
per SAMA standard RC21-4-1966.
(2) Actual value at 0°C (32°F) is100 Ω per SAMA standard RC21-4-1966.
(3)
α
is the temperature coefficient of resistance which is defined as the resistance change per ohm per °C.
(4) Scientific Apparatus Makers Association
(5) Minco Type “NA” (Nickel) and Minco Type “FA” (Nickel-Iron)